How to Fix Kmode Exception Not Handled error: What it is?

Kmode Exception Not Handled is a blue screen of death error on Windows 10, and this error can be caused by a number of factors ranging from the faulty driver to the software installed. This error comes in a variety of forms and can be quite problematic, but luckily there is a solution. kmode_exception_not_handled is likely to be a BSOD error, your computer needs restart whenever this KMODE Error occurs. In some cases, you may not be able to access Windows 10 at all because of this error. Hence, you need to use Safe Mode to fix this problem.

Kmode_exception_not_handled can be a problematic error, but users have also reported the following issues:

Kmode exception not handled ntfs.sys, ndis.sys, wdf01000.sys, etd.sys, tcpip.sys, tppwr32v.sys, usbport.sys, syntp.sys, igdkmd64.sys, intelppm.sys, iastora . sys, netio.sys, – In most cases, this error message will give you the name of the file that caused the error. You can use this information to find the problematic device or application.

Kmode exception is not handled when overclocking – Many users overclock their PCs for maximum performance. However, overclocking can cause this and other errors to appear.

Kmode exception not handled RAM – Another cause of this error could be your hardware. According to users, the most common cause is bad memory.

Kmode_exception_not_handled USB – Sometimes your USB devices can cause this problem to appear. The problem could be a faulty driver or a faulty USB device.

Kmode exception not fixed during installation – Several users reported this problem while installing other applications. This is usually caused by a damaged driver that is incompatible with your PC.

Kmode exception not handled loop – This type of error can seen as soon as you turn on your PC/laptop. The error hardly forces your computer to restart, which leaves your PC cling in a loop.

Kmode exception not handled VMware, VirtualBox – This error can appear on your PC, but also when using virtualization software such as VMware or VirtualBox.

Kmode exception does not handle BSOD – this is a blue screen of death error and will restart your computer as soon as it appears. This can be a big problem and it can prevent you from using your PC.

kmode exception not handled BSOD error on Windows 10 Fix Guide

Solution 1 – Simply Enter Safe Mode & install the lost drivers

Kmode_exception_not_handled can sometimes be caused by lost or misplaced drivers. To fix this problem, it is recommended that you install the missing drivers.

If you cannot access Windows 10, you may need to complete this procedure by entering Safe Mode. To gain access Safe on Windows 10, you need to follow some steps –

After a few restarts of your computer, you should see the Windows Recovery Environment.

• Select Troubleshoot> Advanced Options> Startup Settings . Click on the button New start.

• After restarting your computer, a list will appear. Press F5 to with networking in the change safe mode .
• If this option doesn’t work, you’ll need to enable legacy advanced boot. To complete this process, you will need Windows 10 installation media, e.g. B. a DVD or USB flash drive.
• Place the Windows 10 installation media and restart the computer.
• While your computer is starting up, press the Delete or F2 key to enter the BIOS. It is important to note that your computer may be using a different key to access the BIOS. So be sure to check your motherboard manual.
• After entering the BIOS, you need to set the Windows 10 installation media as the first boot device. If you don’t know how to do it, see your motherboard manual.
• After making the necessary changes, save the changes and exit the BIOS.

kmode exception not handled windows 10

• If you’ve set everything up correctly you should see Press any key to boot from CD or DVD message on your screen. Press any key like space or ctrl or tab to start Windows 10 setup.
• If the Windows Setup window appears, click Next and choose the option repair computers .
• Choose Troubleshoot> Advanced Options> Command Prompt .
• Type C: in the command prompt and press Enter .
• Enter now BCDEDIT / SET DEFAULT {} BOOTMENUPOLICY LEGACY into the command prompt and press Enter to execute it.
• If you did everything correctly, you should see the message The operation completed successfully in the command prompt.
• Type exit in cmd and press Enter .
• Click you on Next to restart the computer. And Now Remove the Windows 10 installation media.
• After making the necessary changes, your computer may boot a little slower, but you can use the F8 or Shift + F8 keyboard shortcut to enter Safe Mode. To enter Safe Mode, do the following:
• While your computer is starting up, press F8 or Shift + F8 .
• If the shortcut works you should see a list of the options available.
• Choose Safe Mode with Networking and wait for your computer to enter Safe Mode.

As mentioned earlier, there is no need to enter Safe Mode when you can access Windows 10. However, if your computer is in a reboot loop and you cannot access Windows 10 at all, then you will need to run all of these solutions from Safe Mode.

Once you enter Safe Mode, you’ll need to install the missing drivers. To do this, follow these steps

1. Press down Windows Key + X and select  Device Manager from the below menu.
   
2. When Device Manager opens, look for any unknown devices, right click them and choose Update Driver .
   
3. Press down for Automatically check for updated driver software . If that doesn’t work, you can use the Browse my computer for driver software option alternatively .
   

After installing all of the lost drivers, exit Safe Mode and see if the problem is resolved or persists.

More Solutions to Fix error  kmode_exception_not_handled

Solution 2 – Uninstall your antivirus software

Sometimes kmode_exception_not_handled errors can be caused by your antivirus software.

Users have reported that McAfee antivirus software is responsible for this error. To fix this error, it is recommended that you remove McAfee Antivirus from your computer.

After uninstalling McAfee Antivirus, you may want to install different antivirus software on your Windows 10 PC.

We wrote about the best antivirus for Windows 10. You may want to choose one of these programs.

 

Solution 3 – Rename the problematic file

As mentioned earlier, software on Windows 10 can sometimes cause kmode_exception_not_handled BSOD error, and users have reported that BitDefender could be the cause of this error.

In most cases, the kmode_exception_not_handled error indicates which particular file caused the error. In the case of BitDefender, for example, this is kmode_exception_not_handled ( bdselfpr.sys ).

Users reported that changing the name of the problematic file, e.g. B. bdselfpr.sys in bdselfpr.s__ has fixed the problem for them .

Keep in mind that changing the name of these files is not always the best solution as it can lead to even greater system instability.

If you are going to change the name of the file that is causing this problem, do a quick investigation and make sure you don’t change the name of an important system file.

 

Solution 4 – Uninstall ON / OFF Gigabyte

ON / OFF Gigabyte is a program designed for use with USB power plants. However, users stated that the driver for this software is out of date and incompatible with Windows 10.

If you are using Gigabyte software ON / OFF on your Windows 10 PC, you will need to remove it to fix kmode_exception_not_handled error.

 

Solution 5 – Manually adjust the CPU voltage

Few users said that the kmode_exception_not_handled BSOD error could be caused by your CPU. To fix it, you will need to manually adjust the CPU voltage.

This is an advanced and potentially dangerous process. Before trying it, check your motherboard manual and contact an expert.

 

Solution 6 – Update your BIOS

In some cases a kmode_exception_not_handled error can occur due to an outdated BIOS version. To update your BIOS, you need to visit the motherboard manufacturer’s website and download the latest BIOS version for your motherboard.

After downloading the latest BIOS, refer to your motherboard’s instruction manual for information on how to properly update the BIOS.

Please note that the BIOS update is an advanced process and if done incorrectly it can cause permanent damage to your PC.

 

Solution 7 – Check your RAM

A faulty RAM module can often be the cause of the kmode_exception_not_handled error. To determine if your memory is causing the problem, you need to do the following:

1. Press Windows Key + R and enter exe . Press Enter or click OK .
2. The Windows Memory Diagnostics window appears. Choose one of the two options and follow the instructions.

 

Solution 8 – Update your network drivers

Kmode_exception_not_handled netio.sys errors is often related to your network adapter. To resolve this issue, it is recommended that you update the drivers for your network adapter.

To do this, simply visit the network adapter manufacturer’s website with another computer and download the latest drivers for your network adapter.

 

Solution 9 – Replace your RAM

Few users have confirmed that kmode_exception_not_handled ntfs.sys is caused by bad RAM. To fix this, you need to find the faulty RAM module and replace it.

If your computer is under warranty, take it to a repair facility and ask them to do it for you.

 

Solution 10 – Uninstall the BitDefender and Cisco VPN clients

According to users, the kmode_exception_not_handled ntfs.sys BSOD error is caused by BitDefender and / or Cisco VPN client. If you have any of these tools installed, you will need to remove them to resolve this error.

As you can see kmode_exception_not_handled BSOD errors can cause you a ton of problems.

In the worst case scenario, you won’t be able to access Windows 10 at all due to the restart loop. In that case, you need to run all of these solutions in Windows 10 Safe Mode.