Driver Power state failure Windows 10 (Blue screen) Resolved

Driver power state Failure error in Windows 10 is a very common type of BSOD error. Windows 10 Blue Screen errors are notoriously scary for users. But, unlike other BSOD errors in Windows 10, this error is relatively easy to fix.

REASONS OF CAUSING

When your computer or any of the installed device drivers goes to sleep while you are already using the computer, Windows sends a wake-up signal to that driver when needed. And, if the driver doesn’t respond to the wake-up signal in time, or doesn’t respond at all, Driver Power Status Error in Windows 10 occurs.

This usually happens due to unfavourable power settings or due to a faulty device driver installed on your computer.

Now that you know the reasons, let’s continue with the methods.

How to fix Windows 10 driver power state failure error

# 1 – Disable Power Saving to Fix Driver Power State Failure Error

If you are using a laptop and it has power saver set, that could be the main reason why your computer got driver_power_state_failure error. This method has been reported to fix the error in most cases. Here are the steps to follow to turn off power saving on your computer:

Step 1 : open start and type Control Panel And click the Control Panel button. Your computer’s control panel will open.

Step 2 : In the control panel, look for the View by dropdown in the upper right corner. Click on the dropdown list and select the Small icons option. From the options that appear, select Meal Options ,

Step 3 : From the new options that appear, see the Power Saving option is selected. If not, choose a balanced option. After that on the right side of the balanced option, click on the Change plan settings option.

Driver Power state failure Windows 10

Step 4 : Now you see the option Change advanced power settings tap on that option.

Step 5 : In the Advanced Settings window, find the Wireless Adapter Settings , then click on it to expand. Then expand Power Saving Mode and from setting in the drop-down menu select Maximum Performance .

Step 6 : look for PCI Express and expand it in same Windows that you are using.

Under it, expand the Link State Power Management option and from its setting dropdown, select the Maximum Energy Saving option. When done, click OK to apply settings.

power options

Now just simply restart your device/pc/laptop and check if you get this error again. If the driver_power_state_failure persists, try the next method.

# 2 – Remove Drivers that that create faults to Fix Driver Power State Failure Error

A faulty driver can be the cause of this issue on your Windows 10 computer. To check if a driver is faulty, you will have to check for drivers with a yellow exclamation mark in the Device Manager window. Follow these steps to find and remove drivers with the problem:

Step 1 : Open Device Manager after typing in search box. The list will now appear; click on the Device Manager button to open it.

Step 2 : In the Device Manager window, you will see a list of drivers. Look for drivers with yellow exclamation marks. If you didn’t find anything, go to Method 3. If you find any driver with an error, right-click it and in the context menu, click Uninstall Driver Option. Do this for all drivers with any error. When done, exit Device Manager.

Device manager

Step 3 Open start write settings in search box. Click on the Settings option that appears in the search result.

Step 4 : In the settings window, click on the Update & Security option.

Step 5 : The Update & Security window will open. Here, go to the Windows Update section where you get the Check for Updates option; Click here. This will look for Windows updates and missing drivers and then follow the onscreen instructions to complete the update.

When the update is complete, your computer will restart. After restarting, see if the problem with the driver power state error continues. If so, go to Updating Other Drivers on Your Computer.

# 3 – Update all your Drivers to Fix Driver Power State Failure Error

At this point, you will need to update each of your drivers to fix the Windows 10 driver power state error problem. Follow these steps:

Step 1 : Open start and type Device manager, and in the list that opens, click on Device Manager.

Step 2 : In Device Manager, right click on the first driver and select Update Driver Software option.

Step 3 : A new window will appear. Here you have to click on Search automatically for updated driver software. This will search for new versions of existing drivers on your computer. If it says you have the latest driver installed, proceed to update the next driver. Otherwise, follow the onscreen instructions to complete the installation. Do this for all drivers.

When done, restart your computer and see if there is a problem. If that doesn’t solve the problem with the Windows 10 driver power status error, try the next method.

# 4 – Downgrade graphics driver to old version

Of all the drivers, most chances are that your Graphics Card Driver is bothering you Driver Power Status Error. If you’ve recently updated your graphics card, try rolling it back to a previous version to fix this issue. Here are the steps for the same:

Step 1: Open start and type Device manager in search box and then in the list that opens, select Device Manager Option to open it.

Step 2: Look for the Display Adapters option and then expand on it. From the expanded list, right-click on the Graphics Driver. In the context menu, click on the Properties option.

device manager

Step 3: In the Properties window that opens, go to the Driver tab. In the tab, you will find the Rollback Driver option. Click on it and follow the instructions on the screen to roll back the current driver to a previous version.

Note: If the “Roll back driver” option is greyed out, it means that your video card driver has not been updated yet.

If this method doesn’t work, then the next method is for you to try.

# 5 – SFC Scan Has to perform to Fix Driver Power State Failure Error

Running an SFC scan on your computer scans the system files and, if a damaged file is found, fixes it. Since Driver Power State Failure Windows 10 error can occur due to corrupted or bad drivers, this can be really helpful. Here are the steps to start an SFC scan:

Step 1: On your keyboard, open start and type command. In the menu that opens, click Command Prompt and right click to run by administrator (Admin) the ability to run a command prompt with administrator rights.

Step 2: In the Command Prompt window, enter the following commands: SFC / SCANNOW and hit the Login key.

The scan may take a while, about 15 minutes or so. Wait for it to complete and do not interrupt the scan. After the scan is complete, restart your computer and check if the problem is still there. If not, try running the next scan.

# 6 – Run DISM Scan

DISM Scan is anything else to perform to scan Windows for possible issues and fix them if found. You can run this scan after SFC scan to fix Driver BSOD Power State Failure. Here are the steps to follow:

Step 1: Open Command Prompt in Admin Mode. To do this, open start and type Command prompt, and from its menu, select Command Prompt (Admin) option.

Step 2: Type following command:

DISM.exe / Online / Clean-up-image / scan health

Then click the Login button. Wait for the scan to complete.

Step 3: After the scan is complete, enter the following command: DISM.exe / Online / Cleanup Image / Health Restore and click Enter.

After the scan is complete, restart your computer and check if your problem was solved or not. If not, try the next step.

# 7 – Disable or uninstall antivirus to fix driver power state failure error

Some of you may disagree with this step, but if none of the methods mentioned above work for you, it might happen. There have been several reports of antivirus software that causing this type of issues. And disabling the antivirus solved the problem for some users. The most common name associated with this issue is Avast. So, if you are an Avast antivirus user, this method is a must.

uninstall antivirus

If disabling your antivirus doesn’t solve the problem for you, try uninstalling it completely as well. If that works, try a new antivirus and see if it is preventing your PC from causing the Driver Power State Failure error.

If disabling or uninstalling your antivirus doesn’t work, re-enable your antivirus and go to the next method.

# 8 – Fix driver power state error by updating BIOS

Updating the BIOS may not be tedious, but it is critical. So, before you decide to try updating your BIOS, make sure you know what you are doing. The first step to updating the BIOS is to find out the current BIOS version and check for an updated version for your computer.

Make sure your laptop is fully charged before continuing with this step. And if you are using a desktop computer, make sure it is connected to an uninterruptible power supply.

Here are the steps to update the BIOS on your computer:

Step 1: Click on the Start button on your computer and enter System Information in the search bar to open it.

Step 2: Under System Information, look for BIOS version under System Summary section.

Step 3 Now go to your PC manufacturer’s website and find the latest BIOS that is compatible with your PC model number. If the latest BIOS is similar to the one installed on your computer, skip this step and check the next method. If a newer BIOS is available, download it. After downloading, make sure your antivirus software is not running.

When ready, run the downloaded BIOS setup file. Before updating, you will find the option to back up your current BIOS; do this before updating the BIOS. When done, proceed with BIOS setup.

Once you start the installation, wait until it finishes, as the BIOS installation may take a while.

This will most likely solve your Driver Power Failure error in Windows 10. If it doesn’t, Method # 9 is your last resort.

# 9 – System Restore

System restore means returning your system to the state it was in the past. And for that, you will need to create a system restore point on your PC, if it was not affected by the driver power state failure error. if you have restore point then proceed otherwise skip this step. And, if you do, then here are the steps for you:

Step 1: On the desktop, right-click this PC icon and click on properties from the context menu.

Step 2: In the window that opens, click on the System Protection option on the left pane.

Step 3: Another new window will open. There click on System Restore Click the button and select the restore point to which you want to roll back your computer. Make sure it is the date before you started getting the driver power state failure error in Windows 10. Run recovery and wait for the system recovery to take place.

Note: Doing a System Restore will destroy all data that you have saved on your computer after the restore date. So, make sure you back up important files to an external drive before restoring your computer.

Driver Power state failure, driver power state failure windows 10, driver_power_state_failure, windows 10 driver power state failure, driver state power failure,

Leave a Reply

Your email address will not be published. Required fields are marked *